How to get access to the DVB-SPI port of Alitronika's PCI boards ?

The connectors for AT800PCI are shown below. There are two RF connectors one for RF input and one as RF loopthrough
which could be used as an input for another DVB-T device. There are two BNC connectors for the DVB-ASI outputs.

There is also a header, as shown, on the AT800PCI board to gain access to the DVB-SPI output if needed..

Every device is supplied with a D-type flat cable and header combination. These connectors can be connected to the
boards and then placed in an empty slot of the PC. Here shown for an AT400PCI device.