 |
|
|
 |
Standard Features: |
 |
|
|
 Combined DVB-S Input and DVB-ASI/SPI Output Device.
High Speed USB 2.0
Windows 2000 & XP Drivers and
API.
Accompanied by DVSStation2 Alitronika's Application Software.
Input
DVB-S Compliant QPSK Reception.
Input Frequency Range: 950 MHz to 2150 MHz.
Symbol Rate: 1 Mbaud to 54 Mbaud.
Supports 188, 204 Transport Packet Sizes.
Output
RF Loop Through Output.
Simultaneous two Serial
( ASI ) and one Parallel ( SPI ) Outputs.
Supports DVB According to Standard A1010 Rev1 and EN50083.
| |
Block
Diagram: |
|
|
|
| |
Application: |
|
|
|
Targeted for Digital Video Professionals, Sophisticated End Users and OEMs
the
AT600USB is an ideal solution for a number of applications such as:
Development Tools.
DVB to IP Gateway.
DVB-S to DVB-ASI & DVB-SPI Converter.
MPEG-II Transport Stream Recording, Monitoring, Playing & Processing.
Software Based MPEGII Decoders.
|
| |
Specification: |
|
|
|
On Board Buffer: 16
Mbytes
RF Tuner Connector: 75 Ohms IEC female Type
Loop Through Connector: 75 Ohms IEC male Type.
Input Frequency Range:950 MHz to 2150 MHz.
Input Signal Level:-65dBm to -25dBm @ 27.5 Mbaud.
Input Symbol Rate: 1 Mbaud to 45 Mbaud.
LO Step Size: 1MHz.
FEC method: Viterbi, Puncture Rate:1/2, 2/3, 3/4, 5/6 and 7/8.
Standards: DVB-S.
Modulation Method: QPSK.
DVB-ASI Connector: 75 Ohms BNC.
Output Signal level: 1.0Vp-p nominal.
DVB-SPI Connector: 25-pin sub-D.
DVB-ASI Output Bit Rate: 0 to 214 Mbit/s.
DVB-SPI Output Bit Rate: 0 to 108 Mbit/s.
DVB-ASI Output Clock: 270 MHz.
DVB-SPI Output Clock: 0 to 13.5 MHz.
DVB-SPI Output Level: LVDS.
|
|
