 |
|
|
 |
Standard Features: |
 |
|
|
 Combined DVB-C
Annex B Input and DVB-ASI/SPI Output Device.
High Speed USB 2.0
Windows 2000 & XP Drivers and
API.
Accompanied by DVSStation2 Alitronika's Application Software.
Input
DVB-Cable
TV Compliant QAM
& 8-VSB Reception.
Input Frequency Range:
54 MHz to 864 MHz.
Channel Bandwidth: 6 MHz.
Supports 188, 204 Transport Packet Sizes.
Output
RF Loop Through Output.
Simultaneous two Serial
( ASI ) and one Parallel ( SPI ) Outputs.
Supports DVB According to Standard A1010 Rev1 and EN50083.
| |
Block
Diagram: |
|
|
|
| |
Application: |
|
|
|
Targeted for Digital Video Professionals, Sophisticated End Users and OEMs
the
AT720USB is an ideal solution for a number of applications such as:
Development Tools.
DVB to IP Gateway.
DVB-C to DVB-ASI & DVB-SPI Converter.
MPEG-II Transport Stream Recording, Monitoring, Playing & Processing.
Software Based MPEGII Decoders.
|
| |
Specification: |
|
|
|
On Board Buffer: 16
Mbytes.
RF Tuner Connector: 75 Ohms IEC female Type.
Loop Through Connector: 75 Ohms IEC male Type.
Input Frequency Range:
54 MHz to 864 MHz.
Input Level: -15dBmV to
+15dBmV ( QAM ) & -80dBmV to 0dBmV ( 8-VSB).
Channel
Bandwidth: 6 MHz.
Standards: DVB-C (ETS 300-429/ITU-T J83 Annex
B) USA.
Modulation Modes:
8VSB/64 QAM/256 QAM.
DVB-ASI Connector: 75 Ohms BNC.
Output Signal level: 1.0Vp-p nominal.
DVB-SPI Connector: 25-pin sub-D.
DVB-ASI Output Bit Rate: 0 to 214 Mbit/s.
DVB-SPI Output Bit Rate: 0 to 108 Mbit/s.
DVB-ASI Output Clock: 270 MHz.
DVB-SPI Output Clock: 0 to 13.5 MHz.
DVB-SPI Output Level: LVDS.
|
|
